GE Fanuc IC693PWR321

GE Fanuc IC693PWR321
GE Fanuc IC693PWR321 Series 90-30
 

MSRP:

$633
 

Price:

 
 

Guarantee:

 

Category:

 

Series:

 
 

The Series 90-30, 90-20, and Micro PLCs are members of the GE Fanuc Series 90 family of Programmable Logic Controllers (PLCs). They are easy to install and configure, offer advanced programming features, and are compatible with the Series 90-70 PLCs.

The 341 and lower Series 90-30 PLCs and Series 90-20 PLC use an 80188 microprocessor. The 35x and 36x series of 90-30 PLCs use an 80386EX microprocessor. The 37x series of 90-30 PLCs use a 586 microprocessor. The Series 90 Micro PLC uses the H8 microprocessor. Both program execution and basic housekeeping tasks such as diagnostic routines, input/output scanners, and alarm processing are supported. The system firmware also contains routines to communicate with the programmer. These routines provide for the upload and download of application programs, return of status information, and control of the PLC.

In the Series 90-30 PLC, the application (user logic) program that controls the end process to which the PLC is applied is controlled by a dedicated Instruction Sequencer Coprocessor (ISCP). The ISCP is implemented in hardware in the Model 313 and higher and in software in the Model 311 systems, and the Micro PLC. The microprocessor and the hardware-based ISCP can execute simultaneously, allowing the microprocessor to service communications while the ISCP is executing the bulk of the application program; however, the microprocessor must execute the non-Boolean function blocks.

With POWER SUPPLY MODULE 120-240 VAC 125 VDC SERIES 90-30
Weight: 1.1 lbs


See also: Fanuc IC693PWR321, GE IC693PWR321

Buy Part# MSRP Price QOHsort descending Condition
IC693PWR321R $633.00(est) $125.00 1 Used
IC693PWR321Y $633.00(est) $125.00 1 Used
Category Models
Racks/Chassis GE Fanuc IC693CHS398
Name: