Texas Instruments Programmer TI 103

Texas Instruments TI 103 Programmer unit used to program the Texas Instruments TI-100 unit. This unit allows users to write, read, and edit ladder logic programs, in the Base Unit memory, and monitor system and program operation. The program unit may either be mounted directly on the front of the Basic Control Unit or connected to it by a 1.5m cable. When mounted directly on the controller, the plug on the rear must mate with the socket on the controller and then the two screws can be screwed in for fastening purposes.

Once the user program is written and tested, the programmer unit may be removed. The unit includes printer port, STEP, CODE, and DATA LED programming button LED areas.

Data Area includes the following calls: [CLR], [INST], [DEL], [BACK STEP], [STAT], [FIND], [ENT], [STEP].