GE IC610CHS120A

The 10-slot UL Listed rack is similar to the existing 5-slot rack, IC610CHS110, in that it has a power supply to the right and slots to contain up to 5 modules. The power supply for this UL rack requires an input power source of 115 V ac.

As with existing S-slot rack, a terminal board is provided for field wiring connections, refer to the following figure. The two top terminals a for the 115 V ac HOT (H) and NEUTRAL (N) connections. The next two terminals are for connecting an external device to the RUN relay, the next two contacts (+ and -) provide a 24 V dc output voltage at 100 mA for connection to an external sensor, and the bottom terminal is the common (C) connection to an expansion rack.

An available Data Communications Unit (DCU) allows the Series One and Series One Plus to communicate with external devices. The Series One PC uses the IC61OCCMlOO DCU, while the Series One Model E, Series One Plus and Series One Plus 3.7K PCs use the IC61OCCM.105 DCU. These devices can be other programmable controllers, computers, or other smart devices. User programs and I/O information in a Series One or Series One Plus PC can be uploaded and downloaded to or from any master device that supports the Series Six CCM2 protocol as defined in the Series Six Data Communication Manual, GEK-25364. For detailed information on how to use a DCU in a Series One or Series One Plus PC system.

- 10-slot local or expansion base,
- 110-220 VAC input power,
- CPU must reside in the first slot of the local CPU base,
- Allows use of intelligent modules
- Base Power consumption: 85VA MAx


Same as DL305 - Manual the same as well