Allen-Bradley 160-BMB2

The internal brake transistor is not available on 0.37 kW (1/2 HP) and 0.55 kW (3/4 HP) units. If external braking is required, a 0.75 kW (1 HP) drive must be used. Dynamic Brake Module option allows you to connect dynamic brake resistors. Not available on .37 or .55 kW (.5 or .75 HP) ratings. Important: P52 - [DB Enable] must be enabled for proper operation.

The 160 Dynamic Brake Module is rated for 5% duty cycle. Use of this package above 5% should not be used and voids the UL rating of this device. When setting this parameter to a value above 5% duty cycle, the resistor must be sized to avoid overheating of the resistor package.