Control Technolgies RCM2030

The RCM-2030, 2030L, and 2032 Relay Contact Modules each provide eight isolated "Form C" relay outputs for the 500 Series I/O base. These modules plug directly into the 500 I/O base and respond to Series 500 instructions. The Model 2030 is designed for high current applications such as switching motor starters. The Model 2030L is designed for low current applications such as switching analog and TTL level signals. The Model 2032 is designed for 125VDC (nominal) low level current applications. The Model 2032 requires no external power supply, module power is taken directly from the I/O base.

Specifications
Isolation: 1500 Vrms channel-to-channel, 1500 Vrms channel-to-backplane
Relay Coil Control Voltage (externally supplied): 24VAC/VDC \'b110%
Nominal Supply Current: 160mA
Switching Rate: 25/second at 100mA
Maximum Contact Life: 2 x 10\fs12 5 \fs20 @ 6 amp
Load Voltage:
Minimum: 15VAC/15VDC
Maximum: 240VAC/150VDC*
Current (Resistive) Per Output Point: 500mA - 6A
In-rush Current: 64A for 2mS (see chart on page 2)
Fuses: Eight 8 Amp 8AGC fuses

See also: Siemens RCM2030, Texas Instruments RCM2030