cab-bat-acc
Model | |
---|---|
![]() |
ABL Sursum 1B6UMABL Sursum 1B6UM |
![]() |
ABL Sursum 2B10UMABL Sursum 2B10UM |
Model | Series | |
---|---|---|
![]() |
Adtran 1175408L2Quad FXS module for the Total Access 750/850. Supports Foreign Exchange Subscriber, Dial Pulse Originate (DPO) and Private Line Automatic Ringdown (PLAR). 50 pin AMP connector for... |
TA850 |
![]() |
Adtran BCU 1200373L2The TA 850 BCU is a common module plug-in unit designed for the TA 850. The BCU, with a built-in CSU, provides all control functions for the TA 850 common units and all individual... |
TA850 |
Model | Series | |
---|---|---|
![]() |
Adtran 1175006L2 PSUPower Supply for Total Access 750/850 Chassis. |
TA850 |
Model | Series | |
---|---|---|
![]() |
Adtran 1175043L3AC Power Supply/Battery Charger 1175043L3 Provides an AC power source for DC-powered Total Access chassis |
TA850 |
Model | Series | |
---|---|---|
![]() |
Adtran 1200375L1The Total Access 850 is an integrated access device designed for cost-effective deployment of voice and data services at the customer premises. The Total Access 850 system... |
TA850 |
Model | |
---|---|
![]() |
AEG 110 CPU 311 00See: Modicon 110 CPU 311 00Schneider Modicon 110 CPU 311 00 CPU. |
![]() |
AEG 110 CPU 311 01See: Modicon 110 CPU 311 01Schneider Modicon 110 CPU 311 01 CPU. |
![]() |
AEG 110 CPU 311 03See: Modicon 110 CPU 311 03Schneider Modicon 110 CPU 311 03 CPU. |
![]() |
AEG 110 CPU 512 02See: Modicon 110 CPU 512 02Schneider Modicon 110 CPU 512 02 CPU. |
![]() |
AEG 110 CPU 612 00See: Modicon 110 CPU 612 00Schneider Modicon 110 CPU 512 02 CPU. |
Model | Series | |
---|---|---|
![]() |
AEG AS-S908See: Modicon AS-S908AEG Modicon AS-S908 Remote I/O Processor - Single Cable |
|
![]() |
AEG B350See: Modicon B350The Gould B350-001, 115 VAC Output Module converts logic signals used within the Micro 84" Programmable Controller into 8 independent 115 VAC outputs. Each output... |
|
![]() |
AEG B351See: Modicon B351The Gould B351 Input Module consists of eight independent and isolated VAC input circuits, Circuit isolation of 1500 VAC, field side status indicators, transient... |
|
![]() |
AEG B352See: Modicon B352Modicon B352 Output Module, 24vdc |
|
![]() |
AEG B353See: Modicon B353Modicon B353 Input Module, 24vdc |
|
![]() |
AEG B3551The Gould B3551 Input Module |
|
![]() |
AEG B357See: Modicon B357The Gould B357-001, 24 VDC Input Module senses and converts 24 VDC switched input signals into logic voltage levels used by the Micro 84'" Controller. The logic... |
|
![]() |
AEG B550See: Modicon B550The MODICON B550 Universal Module conditions four independently useable signals (sharing common source and "return") to the signals used internally in the... |
Modicon 500 Series |
![]() |
AEG B551See: Modicon B551The MODICON B551 Universal Module conditions four independently useable signals (sharing common source and "return") to the signals used internally in the... |
Modicon 500 Series |
![]() |
AEG B553See: Modicon B553The MODICON B553 Universal DC Input Module (True High) conditions four independently useable DC input signals (sharing common source and "return") to the signals... |
Modicon 500 Series |
![]() |
AEG B557See: Modicon B557Gould Modicon B557 5VDC input moduleThe MODICON B557 VDC TTL Input Module (Figures VI-15 and VI-16) conditions up to four independent +5 VDC input signals to the... |
Modicon 500 Series |
![]() |
AEG B558See: Modicon B558The MODICON B558 Universal Module conditions four independently useable signals (sharing common source and "return") to the signals used internally in the... |
Modicon 500 Series |
![]() |
AEG B559See: Modicon B559The MODICON B559 Universal Module conditions four independently useable signals (sharing common source and "return") to the signals used internally in the... |
Modicon 500 Series |
![]() |
AEG B570See: Modicon B570The Modicon B570-001 Output Module has a 16 Point Register Output MUX. |
Modicon 500 Series |
![]() |
AEG B571See: Modicon B571The Modicon Gould B571 is an input module with 16 inputs. |
Modicon 500 Series |
![]() |
AEG B573See: Modicon B573500 Series Modules includes 8 Analog points, Parity checking, Conduit for user wiring, Clamp terminals for one #12 or two #14 wires , Module lights for l/O status... |
Modicon 500 Series |
![]() |
AEG B804See: Modicon B804The B804-115 Vac (16 point) Output Module converts logic signals used in the PLC into 16 independent 115 Vac outputs. Each output is capable of driving a relay,... |
Modicon 800 Series |
![]() |
AEG B805See: Modicon B805The B805-016 115 Vac (16 point) Input Module senses and converts switched input signals into logic voltage levels used by the PLC. The module allows for up to 16... |
Modicon 800 Series |
![]() |
AEG B807See: Modicon B807The Modicon B807 115 VAC (32 point) Input Module senses and converts switched input signals into logic voltage levels used by the PLC. These inputs can be... |
Modicon 800 Series |
![]() |
AEG B824See: Modicon B824The Modicon B824-016 24 Vdc True High Output Module consists of a single group of 16 independent outputs divided into two groups of eight. The B825 senses and... |
Modicon 800 Series |
![]() |
AEG B825See: Modicon B825The Modicon B825-016 24 Vdc True High Input Module consists of a single group of 16 independent inputs. The B825 senses and converts switched input signals into... |
Modicon 800 Series |
![]() |
AEG B828See: Modicon B828The B828-016 5 V TTL Output Module converts logic signals used within the controller into sixteen independent 5 V TTL outputs. These outputs are compatible with... |
Modicon 800 Series |
![]() |
AEG B833See: Modicon B833The Modicon B833-016 24 Vdc Input Module (True Low) consists of two groups of eight independent inputs. The B833 senses and converts switched input signals into... |
Modicon 800 Series |
![]() |
AEG B865See: Modicon B865The Modicon B865-001 Register Input Module provides a 5 V TTL or CMOS-compatible interface between peripheral field devices and a PLC. The B865 is an eight-... |
Modicon 800 Series |
![]() |
AEG DEP-226The DEP 216/226 is a 24 Vdc, 16-point discrete input module. It senses input signals received from field sensing devices such as pushbuttons, limit and proximity switches, or... |
|
![]() |
AEG J375See: Modicon J375The J375 Modbus adapter is a communication interface for the Micro 84 controller. It interfaces the Micro 84 to a Modbus industrial communication system. It... |
Model | |
---|---|
![]() |
AEG M984-230See: Modicon M984-230Programmable logic controller on either the Allen Bradley DF-1 protocol or AEG-Modicon Modbus RTU Protocol are accommodated by the EPLCG, for both protocols... |
![]() |
AEG Micro 84 ControllerSee: Modicon Micro 84 ControllerThe MICRO 84 is a microprocessor-based programmable controller designed to replace relay control systems that require 6 to 60 relays. In addition,... |
![]() |
AEG PC-A984-145See: Modicon PC-A984-145Modicon PC-A984-145 Programmable Control. 8K CPU with MB Plus |
Model | |
---|---|
![]() |
AEG P370See: Modicon P370Modicon P370 Gould Micro 84 Programmer. Operator interface keypad and display for programming of Micro 84 controllers. |
Model | |
---|---|
![]() |
AEG AS-H819-209See: Modicon AS-H819-209This backplanes are compatible with the ASP890300 . |
![]() |
AEG AS-H827-100See: Modicon AS-H827-100Modicon 11-slot rack/Chassis for Modicon 984. |
Model | |
---|---|
![]() |
Allen-Bradley 1492-SM8X12Blank Relay Replacement Markers for use with 700-HA, HB, and HD series relays. Squares fit into molded slot on top of relays. |
Model | |
---|---|
![]() |
Allen-Bradley 1771-CLThis cable attaches to the 1771-PA Power Supply.For ease of installation, the I/O Power Cable is installed prior to installing the Mini-PLC-2/15 Processor Module. The I/O Power... |
Model | Series | |
---|---|---|
![]() |
Allen-Bradley 800M-XA7Allen-Bradley 800T-XA7 Contact Block, 1NC/1NCLB, Type 4/13, 30mm, Screw Attachment |
800T |
Model | Series | |
---|---|---|
![]() |
Allen-Bradley 1760-LDFAllen-Bradley Pico GFX-70 DC Processor Unit (1760-LDF)The remote processor is used for terminal mode operation of Pico controllers and I/O modules. |
PICO |
Model | Series | |
---|---|---|
![]() |
Allen-Bradley 700-HA32Z24Allen-Bradley 700-HA32Z24-3, Relay, Ice Cube, 11-Pin, 3PDT, 10A, 24VDC Coil, Push to Test, LED |
Bulletin 700 |
![]() |
Allen-Bradley 700-HXThe Allen Bradley 700-HX digital timing relay is a programmable timing device. You can program it to display either elapsed or time remaining. The timing relay has a four-... |
|
![]() |
Allen-Bradley 700S-CFB620EJCBulletin 700S-CF Safety Control Relays provide mechanically or mirror contact performance, which are required in feedback circuits for safety applications. Bifurcated contacts are... |
Bulletin 700 |
Model | Series | |
---|---|---|
![]() |
Allen-Bradley 1747-DCMThe Allen-Bradley Direct Communication Module, 1747–DCM, is used to connect an SLC 500 Fixed Programmable Controller with expansion chassis or any SLC 500 Modular Programmable... |
SLC 500 |
Model | Series | |
---|---|---|
![]() |
Allen-Bradley 1745-LP151With it's High Speed Input (HSI) module, the Allen-Bradley SLC 150 Model 1745 Processor Unit can count high speed input signals (up to 5KHZ). Up to four high speed input devices,... |
SLC 150 |
![]() |
Allen-Bradley 1785-LT AAllen Bradley PROCESSOR MODULE 6K MEMORY PLC-5/12The Allen-Bradley PLC-5 processors have ports configurable for either a Data Highway Plus messaging communication link or a... |
PLC-5 |
Model | Series | |
---|---|---|
![]() |
Allen-Bradley 1745-E1055SLC 100 expansion units have the same constructions the SLC 100 processor unit. Expansion units are available in I/O configurations. The basic unit has 10 input circuits output... |
SLC 100 |
![]() |
Allen-Bradley 1746-ITV16Allen-Bradley 1746-ITV16 SLC 500 16 Channels Fast Response DC Sourcing Input Module 24V DC. |
SLC 500 |
![]() |
Allen-Bradley 1760-IB12XOW4IFGFX I/O modules connect to the back of the GFX processor. Pico Expansion I/O modules connect to side of controller, and can be used with Pico or Pico GFX-70 controllers. You can... |
PICO |
![]() |
Allen-Bradley 1771-IA/BAllen-Bradley 1771-IA/B Output Module 120V |
|
![]() |
Allen-Bradley 1771-IAD/BThe Allen-Bradley 1771-IAD Input Module provides:- Native I/O providing highest performance- Is chassis-based and can accommodate a wide range of I/O types- Controls an entire... |
PLC-2 |
![]() |
Allen-Bradley 1771-IAD/CThe Allen-Bradley 1771-IAD Input Module provides:- Native I/O providing highest performance- Is chassis-based and can accommodate a wide range of I/O types- Controls an entire... |
PLC-2 |
![]() |
Allen-Bradley 1771-IAD/DThe Allen-Bradley 1771-IAD Input Module provides:- Native I/O providing highest performance- Is chassis-based and can accommodate a wide range of I/O types- Controls an entire... |
PLC-2 |
![]() |
Allen-Bradley 1771-IXAllen-Bradley 1771-IX PLC-5 Thermocouple/Millivolt Input Module, is an intelligent block transfer module that interfaces analog input signals with any Allen–Bradley programmable... |
|
![]() |
Allen-Bradley 1771-OBEAllen Bradley DC Output Module 1771-OBE |
|
![]() |
Allen-Bradley 1791-8BRAllen-Bradley 1791-8BR Block I/O, 24V DC, 16 Point Module. |
|
![]() |
Allen-Bradley 1791D-OB16PXCompactBlock I/O modules are compatible with PLC, SLC or SoftLogix programmable controllers using DeviceNet scanners. All CompactBlock I/O module values are accessible through the... |
|
![]() |
Allen-Bradley 1794-IH16Capabilities of the 1794-IH16:- 61131-2 Type 3 compatible sinking inputs.- interface with PNP sourcing sensors.- 10-31.2V dc operating range.- provides up to 50 mA to power an... |
1794 |
![]() |
Allen-Bradley 2755-IB5SAllen-Bradley 2755-IB5S is the same as 1781-IB5S Slim input module. Slim modules have a hold-down screw, and can be used in mounting boards where vibration and shock are not of... |
2801 |
Model | |
---|---|
![]() |
Allen-Bradley 1771-IEDAllen Bradley 1771-IED Analog Input Module, 8-bit. |
![]() |
Allen-Bradley 1771-IFEThe Allen-Bradley 1771-IFE analog input module is a single-slot module and requires no external power supply. After scanning the analog inputs, the input data is converted to a... |
Model | |
---|---|
![]() |
Allen-Bradley 1747-AICThe isolated link coupler (1747-AIC) is used to connect SLC 500 family devices to the DH-485 network (as shown on page A-5). The coupler provides a 6-position removable terminal... |
Model | |
---|---|
![]() |
Allen-Bradley 1734-FPDThe purpose of the Allen-Bradley 1734-FPD module is to break the field power distribution. Use the module to change the field power distribution source for I/O modules to the... |
Model | Series | |
---|---|---|
![]() |
Allen-Bradley 1771-A4BThis equipment is considered Group 1, Class A industrial equipment according to IEC/CISPR Publication 11. This equipment is supplied as open type equipment. It must be mounted... |
PLC-5 |
![]() |
Allen-Bradley 1771-AM2This 2 slot I/O Chassis has switches for setting the programmable controller applications and indicators for troubleshooting the power supply and adapter sections.Technical... |
Model | Series | |
---|---|---|
![]() |
Allen-Bradley 1746-A3The 1746-A3 serves as an expansion module to the SLC 500 series. A thermocouple module fits into any single-slot, except the processor slot (0), in either an SLC 500 modular... |
SLC 500 |
Model | Series | |
---|---|---|
![]() |
Allen-Bradley 1747-L40CThe Allen-Bradley SLC 500 programmable controller 1747-L40.24POINT SINK IN/16 RELAY OUT AC POWER SLC500 |
SLC 500 |