Modules
| Model | Series | |
|---|---|---|
 |
Beckhoff KL1184The KL1184 and KL1194 digital input terminals acquire the binary control signals from the process level and transmit them, in an electrically isolated form, to the higher-level... |
Beckhoff KL Series |
 |
Beckhoff KL2022KL2022 | 2-channel digital output terminals 24 V DCThe KL2022 digital output terminals connect the binary control signals from the automation unit on to the actuators at the... |
Beckhoff KL Series |
 |
Beckhoff KL2184KL2184 - 4-channel digital output terminal 24 V DC, switching to negative potentialThe KL2184 digital output terminal connects the binary control signals from the automation unit... |
Beckhoff KL Series |
| Model | |
|---|---|
 |
Burster 9243Burster 9243: Built-in calibration, potential separation, configurable by DIP-switches, easy installation on DIN mounting rails, optionally version with protection class IP65.The... |
| Model | |
|---|---|
 |
B & R Automation X20BM15The BM15 bus module serves as the base for all 24 VDC X20 I/O modules. This bus module is also used to determine a unique address using node number switches. |
| Model | |
|---|---|
 |
B & R Automation CP474The B & R Automation CP474 CPU has four local slots integrated. Analog or digital screw-in modules for I/O signals can be operated on these slots. The CP474 is equipped with a... |
| Model | |
|---|---|
 |
B & R Automation CP430B&R Automation CP430 is a 2003 CPU with 100 KB SRAM, 256 KB Flash PROM and a 24 VDC, 7 W supply. This CPU has 1 RS232 interface 1 CAN interface. |
 |
B & R Automation ECPNC3-1B & R ECPNC3-1 Encoder Counter Module. MULTI counter module (positioning), 1 input for incremental encoder, 24 bit Input frequency 50 kHz 1 analog output +/- 10 V, 11 bit... |
| Model | |
|---|---|
 |
B & R Automation DI135The DI135 Digital Input Module is a screw-in module for the System 2003 and Power Panel. They can be used for the following tasks: TPU functions Counting and measuring digital... |
 |
B & R Automation DO135The DO135 is a 4-channel digital output module. The operating mode can be set separately for each output. The following operating modes are available: Normal operation - switching... |
