cab-bat-acc
| Model | |
|---|---|
 |
Minarik 170-0533Specifically designed for the original equipment manufacture, the XP02 Series of DC motor speed drive provides high performance at a low cost. These drives are well suited for... |
| Model | Series | |
|---|---|---|
 |
Mitsubishi A1SCPUMitsubishi A1SCPU CPU Module, 256 I/O, 8K STEPS RAM |
MELSEC A |
| Model | Series | |
|---|---|---|
 |
Mitsubishi FX-8EYRMitsubishi FX-8EYR Terminal Block. Remote terminal blocks allow I/O modules to be placed at the point of control. The blocks are connected with FX3UC main units using connector-... |
MELSEC |
| Model | |
|---|---|
 |
Mitsubishi FX-8EYSThe TRIAC output can be used in AC load only, and due to the TRIACs need to maintain its conductivity, the load current should be larger than the holding current (25mA). Thus,... |
| Model | Series | |
|---|---|---|
 |
Mitsubishi A1SJCPU-S3Mitsubishi A1SJCPU-S3 PLC Combination CPU With Rack A1SJCPU-S3 |
MELSEC A |
 |
Mitsubishi FX-2DAThe FX-2DA analog special function block has two output channels. The output channels take a digital value and output an equivalent analog signal. This is called a D/A conversion... |
MELSEC |
 |
Mitsubishi FX2N-16MRThis unit handles processing of basic instructions 6 x faster than earlier modules.Offers High Speed counters including high speed pulse ouputSimple positioning operations at up... |
MELSEC |
| Model | |
|---|---|
 |
Modicon 110 CPU 512 04Schneider Modicon 110 CPU 512 04 CPU. |
| Model | Series | |
|---|---|---|
 |
Modicon B341The Gould B341 Input Module |
|
 |
Modicon B814-108The B814-108 Relay Output Module converts signals from the PLC to eight independent relay outputs. Each output is capable of driving a relay, pilot lamp, motor starter, solenoid,... |
Modicon 800 Series |
| Model | |
|---|---|
 |
Montronix MM-CXSee: Deemstop MM-CXThis Monitoring module unit allow for input signals of 24 MAX @ 24 DC/5ma OR 110V/ 5ma. It allows for output signals of 8 Max @ 24V DC/200ma OR 110V/200ma.... |
| Model | |
|---|---|
 |
National Instruments FP-1601The National Instruments FP-1601 network module connects a 10/100 Ethernet network to FieldPoint I/O modules. Because the FP-1601 is an Ethernet device, the maximum number of FP-... |
| Model | |
|---|---|
 |
Numatics 239-1871NUMATICS MANIFOLD PART #239-1871. G2-2 16 INPUTS 25 PIN SUB-D PNP |
| Model | |
|---|---|
 |
Omega PX273-050DIThe OMEGA PX273 is an all DP25B-E,* DP24-E* stainless steel wet/wet differential pressure transmitter, incorporating dual diffused resistive sensing elements with stainless steel... |
| Model | |
|---|---|
 |
Omron E5CKThe Omron E5CK is a compact, intelligent digital controller. The E5CK allows the user to carry out the following: - Select from many types of temperature and analog input (... |
|
|
Omron V600-CD1D-V2The Omron V600-CD1D-V2 identification system controller offers powerful support to the automation of large-scale distributed control systems and multi-model small-scale production... |
| Model | Series | |
|---|---|---|
 |
Omron SR06AMOmron STI SR06AM Safety Relay 24VDC/AC |
STI |
| Model | |
|---|---|
 |
Omron H3BAOmron H3BA Timer Relay |
| Model | |
|---|---|
 |
Omron S3D8-CCF-USOmron S3D8-CCF-US Sensor Controller. |
| Model | Series | |
|---|---|---|
|
|
Omron 3G2A3-ID411Omron 3G2A3-ID411 12-48V DC Input Module |
|
 |
Omron C200H-ID317Omron High Density Input Module for increasing I/O capacity. |
C200H |
 |
Omron C200HW-BC101-V1A C200HX/HG/HW CPU Rack allows the connection of these other components: (1) The CPU Backplane, to which the CPU Unit and other Units are mounted. (2) The CPU Unit, which executes... |
|
 |
Omron G72C-ID16Omron G72C-ID16 remote terminal has Terminal Block and Transmission Capability in One Module. |
| Model | Series | |
|---|---|---|
 |
Omron C200H-CPU01-EOmron C200H-CPU01-E Programmable Controller |
C200H |
|
|
Omron C28P-CDR-AEach Programmable controller is connected in series starting with a CPU and, if required, continuing on with Expansion I/O or Special I/O Units. All other Units are connected in... |
