Mitsubishi FX-2DA
The FX-2DA analog special function block has two output channels. The output channels take a digital value and output an equivalent analog signal. This is called a D/A conversion. The FX-2DA has a maximum resolution of 12 bits.
FX programmable controllers versions 2.0 or later (those with serial number 13XXXX or larger) are required; as these units have the TO/FROM applied instructions in their instruction set. Data transfer between the FX-2DA and the FX base unit is by buffer memory exchange. There are 32 buffer memories (each of 16 bits) in the FX-2DA.
The selection of voltage or current based input/output is by user wiring. Analog ranges of -10 to 10V (resolution: 5mV), and/or 4 to 20mA (resolution: 20mA) maybe selected.
The FX-2DA occupies 8 points of I/O on the FX, FX2C expansion bus. The 8 points can be allocated from either inputs or outputs. The FX-2DA draws 30mA from the 5V rail of the base unit or powered extension unit.
Category |
Models |
|---|---|
| Controls | Mitsubishi KOJ2-E56DR |
|
Category |
Models |
|---|---|
| Communication Module Modules | Mitsubishi FX1S-14MT-D, Mitsubishi FX1S-20MT-D |
| CPU Modules | Mitsubishi A0J2CPU |
| I/O Modules | Mitsubishi AJ65VBTCF1-32DT1, Mitsubishi AJ65VBTCU3-16D1, Mitsubishi FX-16EYR, Mitsubishi FX2-40AW, Mitsubishi FXON-40MT |
| Programmable Controller Modules | Mitsubishi A0J2-E28DT, Mitsubishi A0J2-E56DR, Mitsubishi A0J2-E56DT, Mitsubishi FX1S-14MR-ES/UL, Mitsubishi FX2NC-32MT |
| Relay Modules | Mitsubishi F1-12MR |
| Terminal Adaptor Modules | Mitsubishi A1S-TA32 |
cab-bat-acc
Cables, batteries and other accessories are sold separately unless otherwise stated.
