Phoenix Contact MCR-S-10-50-UI-SW-DCI

The MCR-S-xx-DCI current transducers offer users the option of ordering a preconfigured device, configuring the device themselves via DIP switches or programming it with MCR/PI-CONF-WIN configuration software. With a measuring range of 0 ... 9.5 A to 0 ... 55 A, the MCR-S-10-50-UI-DCI is ideal for measuring higher motor currents. DC, AC, and distorted currents can be equally well measured. In addition to an analog output, these current transducers also have an optional relay and transistor output, e.g., for alarm monitoring.

Features -Progressive adjustment of measuring range
-True r.m.s. value measurement
-3-way electrical isolation according to EN 61010
-With optional relay and transistor output
-22.5 mm ME housing

Input Current measuring input
Configurable/programmable Yes, preconfigured
Input current range 0 A ... 55 A (AC/DC)
Operate threshold 0.8 % (of measuring range nominal value 50 A)
Setting range for min. input current 0 A ... 9.5 A
Setting range for max. input current 0 A ... 55 A
Impulse form AC, DC or distorted currents
Overload capacity Depending on through connected conductor
Surge strength Depending on through connected conductor
Frequency measuring range 15 Hz ... 400 Hz
Connection method Through connection, diameter 10.5 mm