Camac Output register Driver CAMAC

The CAMAC standard has been widely used for measurement procedures in high energy physics. Usually the crates are connected to an IBM compatible PC.

The OUTPUT REGISTER Register Driver outputs the signal of 16bit that set up by the CAMAC function.The output signal is selected(TTL or FAST NIM) by the toggle switch on front panel.Also, the output signal is possible the selection of the pulse or level by CAMAC function.

Functionality includes REMOTE CONTROL APPLICATIONS, PROGRAMMABLY SET OR RESET EACH INDIVIDUAL CHANNEL OR ALL 16, CHANNELS AT ONE TIME, PROVIDES CHOICE OF OPTICAL, REED RELAY OR TTL OUTPUTS WHICH WILL BEST SATISFY A PARTICULAR APPLICATION

The device drivers can be used with the following CAMAC controllers: - Aachen DBCC Controller with PCCPI Card. For Revision "c" interrupt support is in preparation. PCCPI cards newer than Rev.c are not usable yet (although it is not difficult to include it, but I have no board to test it).
- Wiener Camac Crate Controller CC16 with the PC card PC16. In fact, this is the commercial version of the DBCC Rev.c controller.
- Jorway 73A SCSI CAMAC Crate Controller with a PC SCSI adapter.

C-UV 002 UNIVERSAL BOARD FOR LOGIC has pattern for power supply of ±5V.And that has patternized power line and GND line for arrangement of digital IC.The pattern designed to be easy to wire.The board size is maximum size of CAMAC standard.