 |
Connecting Wiring to the Input ModuleConnections to the input module are made to the 10 terminal field wiring arm (cat. no. 1771-WA) shipped with the module (Figure 1). Attach the... |
|
 |
Allen-Bradley 1771-IV PLC-5 Driver Logic Input Module, (8) 12-24V DC Digital Inputs, Source (Sink load), Operating Voltage: 12-24V DC; Wiring Arm: 1771-WA, Series A |
PLC-5 |
 |
The 1771-IVN DC input module is a source input and requires a sink output. A source input provides a positive voltage path and a sink output provides a path to ground. The module... |
|
 |
Allen-Bradley 1771-IX PLC-5 Thermocouple/Millivolt Input Module, is an intelligent block transfer module that interfaces analog input signals with any Allen–Bradley programmable... |
|
 |
Allen-Bradley PLC-5 1771 Series I/O 1771-IXC Thermocouple Input Module |
PLC-5 |
 |
Allen-Bradley 1771-IXE PLC-5 Thermocouple/Millivolt Input Module, is an intelligent block transfer module that interfaces analog input signals with any Allen–Bradley programmable... |
|
 |
The output module is powered by the power supply connected to the I/O chassis backplane. The module requires a maximum current of 210mA from the +5V dc output of this supply.... |
|
 |
You can use an output of the 1771-OA module to drive an input of a 120V AC input module (1771-IA, -IA2, -ID and -IAD) to indicate status, such as the turning on a motor starter.... |
PLC-2 |
 |
This module uses zero-crossing technology to allow turn-on when the output voltage is less than a specified voltage (typically 40 to 50V). This module receives its power through... |
PLC-2 |
 |
You can directly drive terminals on a DC (12-24V) Input Module (cat. no. 1771-IB) from terminals on the DC (12-24V) Output module (cat. no. 1771-OB) as shown in Important: Use the... |
|
