Modules · I/O
Model | Series | |
---|---|---|
![]() |
Allen-Bradley 1771-IXEAllen-Bradley 1771-IXE PLC-5 Thermocouple/Millivolt Input Module, is an intelligent block transfer module that interfaces analog input signals with any Allen–Bradley programmable... |
|
![]() |
Allen-Bradley 1771-OAThe output module is powered by the power supply connected to the I/O chassis backplane. The module requires a maximum current of 210mA from the +5V dc output of this supply.... |
|
![]() |
Allen-Bradley 1771-OABYou can use an output of the 1771-OA module to drive an input of a 120V AC input module (1771-IA, -IA2, -ID and -IAD) to indicate status, such as the turning on a motor starter.... |
PLC-2 |
![]() |
Allen-Bradley 1771-OADThis module uses zero-crossing technology to allow turn-on when the output voltage is less than a specified voltage (typically 40 to 50V). This module receives its power through... |
PLC-2 |
![]() |
Allen-Bradley 1771-OBYou can directly drive terminals on a DC (12-24V) Input Module (cat. no. 1771-IB) from terminals on the DC (12-24V) Output module (cat. no. 1771-OB) as shown in Important: Use the... |
|
![]() |
Allen-Bradley 1771-OBDThe Allen-Bradley 1771-OBD is a 10-30V DC output module, 16 outputs. Place your module in any I/O module slot of the I/O chassis, except for the extreme left slot. This slot is... |
|
![]() |
Allen-Bradley 1771-OBEAllen Bradley DC Output Module 1771-OBE |
|
![]() |
Allen-Bradley 1771-OBNAllen-Bradley 1771-OBN PLC-5 10-30V DC High-True Output Module with 32 Outputs. |
|
![]() |
Allen-Bradley 1771-OCAllen-Bradley 1771-OC PLC-5 Digital DC Output Module, 8 x Source Outputs, 10-60V DC, Series B |
PLC-2 |
![]() |
Allen-Bradley 1771-ODThis module receives its power through the 1771 I/O chassis backplane from the chassis power supply. The module requires 700mA from the output of this supply. Add this to the... |
|
![]() |
Allen-Bradley 1771-OD16Interfaces your ON/OFF devices to AllenBradley programmable controllers within the 1771 Universal I/O structure. Allen-Bradley digital ac I/O modules interface to ON/OFF devices... |
|
![]() |
Allen-Bradley 1771-OD16/BInterfaces your ON/OFF devices to AllenBradley programmable controllers within the 1771 Universal I/O structure. Allen-Bradley digital ac I/O modules interface to ON/OFF devices... |
|
![]() |
Allen-Bradley 1771-ODCAllen-Bradley 1771-OD digital output module 6 pointConnections to the output module are made to the field wiring arm (cat. no. 1771-WH) shipped with the module. An optional fused... |
|
![]() |
Allen-Bradley 1771-OFCAllen Bradley,1771-OFC Series B Programmable Logic Contol - Analog Output Module 12-bit PLC-5 System of Programmable Logic Controllers |
|
![]() |
Allen-Bradley 1771-OGThe TTL module requires power from two sources: the I/O chassis backplane, and a +5V dc power supply that you provide for transmission of TTL signals.The TTL module receives its... |
|
![]() |
Allen-Bradley 1771-OGCThe TTL module requires power from two sources: the I/O chassis backplane, and a +5V dc power supply that you provide for transmission of TTL signals.The TTL module receives its... |
|
![]() |
Allen-Bradley 1771-OGDThe Allen-Bradley 1771-OGD is a TTL compatible discrete Output module that will interface to TTL output device and will control up to 16 outputs. The 1771-OGD has output diode... |
|
![]() |
Allen-Bradley 1771-ONThis module receives its power through the 1771 I/O chassis backplane from the chassis power supply. The module requires 700mA from the output of this supply. Add this to the... |
|
![]() |
Allen-Bradley 1771-ONDThis module receives its power through the 1771 I/O chassis backplane from the chassis power supply. The module requires 700mA from the output of this supply. Add this to the... |
|
![]() |
Allen-Bradley 1771-OWAllen-Bradley relay contact output modules offer either normally-open (Form A) or normally-closed (Form B) configurations. You can select the form configuration for four of the... |
|
![]() |
Allen-Bradley 1771-OYCAllen-Bradley 1771-OYC Contact Output Module 10-276V AC |
PLC-5 |
![]() |
Allen-Bradley 1771-OZAllen Bradley 1771-OZ.Description: Allen Bradley PLC 5 Contact Output Module, 8 N.O., 30 VA at 138 VAC or 20 VA at 125 VDC Max Voltage |
|
![]() |
Allen-Bradley 1771-OZLThe 1771-OZL module has 8 Form A relays. The outputs are arranged in 4 groups of 2, each group with its own common. Each output is electrically isolated from module logic... |
|
![]() |
Allen-Bradley 1771-SIMThe 1771-SIM Module is an input simulation and output indicating module. It can be inserted into any 1771 Universal I/O chassis. The switches on this single-slot module simulate... |
|
![]() |
Allen-Bradley 1771-SNAllen Bradley Sub I/O Scanner Module 1771-SN. The 1771-SN Sub I/O Scanner Module is used to expand your I/O sub-system by up to 896 digital remote I/O.The sub I/O scanner can... |
|
![]() |
Allen-Bradley 1772-LSPThe Mini-PLC-2/05 processor is functionally similar to the Mini-PLC-2/15 processor. The Mini-PLC-2/05 processor has some additional features: 3K CMOS RAM memory 488 timers, up to... |
PLC-2 |
![]() |
Allen-Bradley 1772-SD2The 1772-SD2 Remote I/O Scanner/Distribution Panel is a compact, single board, stand-alone unit.It enables the Allen-Bradley PLC-2, PLC-2/20 and PLC-2/30 processors to communicate... |
|
![]() |
Allen-Bradley 1781-IB5SAllen-Bradley 1781-IB5S Slim input module. Slim modules have a hold-down screw, and can be used in mounting boards where vibration and shock are not of concern.See also: Allen-... |
2801 |
![]() |
Allen-Bradley 1781-OB5SAllen-Bradley 1781-OB5S Slim output module. Slim modules have a hold-down screw, and can be used in mounting boards where vibration and shock are not of concern. |
2801 |
![]() |
Allen-Bradley 1791-8BRAllen-Bradley 1791-8BR Block I/O, 24V DC, 16 Point Module. |
|
![]() |
Allen-Bradley 1791D-OB16PCompactBlock I/O modules are compatible with PLC, SLC or SoftLogix programmable controllers using DeviceNet scanners. All CompactBlock I/O module values are accessible through the... |
|
![]() |
Allen-Bradley 1791D-OB16PXCompactBlock I/O modules are compatible with PLC, SLC or SoftLogix programmable controllers using DeviceNet scanners. All CompactBlock I/O module values are accessible through the... |
|
![]() |
Allen-Bradley 1791DS-IB12Allen-Bradley 1791DS and 1791ES CompactBlock™ Guard I/O™ modules provide the advantages of distributed I/O for safety systems. These modules work with safety controllers that... |
|
![]() |
Allen-Bradley 1791DS-IB8XOB8Allen-Bradley 1791DS and 1791ES CompactBlock™ Guard I/O™ modules provide the advantages of distributed I/O for safety systems. These modules work with safety controllers that... |
|
![]() |
Allen-Bradley 1791ESThe Allen-Bradley 1791ES CompactBlock Guard I/O for EtherNet/IP. This module provides the advantages of distributed I/O for safety systems. They work with safety controllers that... |
|
![]() |
Allen-Bradley 1794-ADNAllen-Bradley 1794-ADN DeviceNet FLEX I/O 24V DC Media Adapter Module, Series B. |
1794 |
![]() |
Allen-Bradley 1794-IB16Capabilities of the 1794-IB16D include:- 61131-2 Type 3 compatible sinking inputs.- interface with PNP sourcing sensors.- 10-31.2V dc operating range.- provides up to 50 mA to... |
1794 |
![]() |
Allen-Bradley 1794-IH16Capabilities of the 1794-IH16:- 61131-2 Type 3 compatible sinking inputs.- interface with PNP sourcing sensors.- 10-31.2V dc operating range.- provides up to 50 mA to power an... |
1794 |
![]() |
Allen-Bradley 1794-OB16You can use FLEX I/O diagnostic output modules to drive a variety of output devices. Typical output devices include the following: Relays, Solenoids, Contactors, Indicators, and... |
1794 |
![]() |
Allen-Bradley 1794-OB16PAllen-Bradley 1794-OB16P FLEX I/O Output Module. The Allen-Bradley 1794-OB16P I/O module is a Flex digital DC output module for programmable controller sourcing ( 24 VDC, 16... |
1794 |
![]() |
Allen-Bradley 1794-OE4Allen-Bradley 1794-OE4 I/O Module, 4 Single Ended, Analog Output, 20mA, 24VDC |
1794 |
![]() |
Allen-Bradley 2755-IB5SAllen-Bradley 2755-IB5S is the same as 1781-IB5S Slim input module. Slim modules have a hold-down screw, and can be used in mounting boards where vibration and shock are not of... |
2801 |
![]() |
Allen-Bradley 2801-JIDAllen Bradley 2801-JID. 24V 5V LOGIC SLIM . |
2801 |
![]() |
Allen-Bradley 2801-JODAllen Bradley 2801-JOD 3-60 VDC 5V logic 1 Point Output Module |
2801 |
![]() |
Allen-Bradley 8500-1746IAllen Bradley 8500-1746I I/O Ring Adapter Module 9/Series |
Model | Series | |
---|---|---|
![]() |
Allen-Bradley 1771-IEAllen Bradley 1771-IE Analog Input Module, 8-bit. |
|
![]() |
Allen-Bradley 1771-IEDAllen Bradley 1771-IED Analog Input Module, 8-bit. |
|
![]() |
Allen-Bradley 1771-IFEThe Allen-Bradley 1771-IFE analog input module is a single-slot module and requires no external power supply. After scanning the analog inputs, the input data is converted to a... |
|
![]() |
Allen-Bradley 1771-OFE1The Allen-Bradley Analog Output Module 1771-OFE1 is an intelligent block transfer module that converts binary or four-digit BCD values (supplied by your processor) to analog... |
1771 |
Model | Series | |
---|---|---|
![]() |
Allen-Bradley 1746-IA16The Allen-Bradley SLC 500 Model 1746 Input Module receives and stores digitally converted analog data into its image table for retrieval by all fixed and modular SLC 500... |
SLC 500 |
![]() |
Allen-Bradley 1746-IB32Allen Bradley 1746-IB32 SLC 500 32 Channel DC Digital Input Module. |
SLC 500 |
![]() |
Allen-Bradley 1746-ITB16The Allen-Bradley 1746-ITB16 SLC 500 is a Digital DC Input Module. Its operating voltage is 10 - 30V DC, it has 16 inputs with 16 points per common, and it requires a backplane... |
SLC 500 |
![]() |
Allen-Bradley 1746-OA16The Allen-Bradley SLC 500 Model 1746 Output Module receives and stores digitally converted analog data into its image table for retrieval by all fixed and modular SLC 500... |
SLC 500 |
![]() |
Allen-Bradley 1746-OA8Allen Bradley AC Output Module 1746-OA8. 85-265 VAC, 8 pt. |
SLC 500 |
![]() |
Allen-Bradley 1746-OB16The Allen-Bradley SLC 500 Model 1746-OB16 Output Module receives and stores digitally converted analog data into its image table for retrieval by all fixed and modular SLC 500... |
SLC 500 |
![]() |
Allen-Bradley 1746-OB32The Allen-Bradley 1746-OB32 is a digital DC output module |
SLC 500 |
![]() |
Allen-Bradley 1746-OB8The Allen-Bradley 1746-OB8 is a general-purpose digital DC output module that contains 8 outputs. |
SLC 500 |
![]() |
Allen-Bradley 1746-OBP16The Allen-Bradley SLC 500 Model 1746-OBP16 Output Module receives and stores digitally converted analog data into its image table for retrieval by all fixed and modular SLC 500... |
SLC 500 |
![]() |
Allen-Bradley 1746-OV16The Allen-Bradley SLC 500 Model 1746 Output Module receives and stores digitally converted analog data into its image table for retrieval by all fixed and modular SLC 500... |
SLC 500 |
![]() |
Allen-Bradley 1746-OV32The 1746-OV32 is a digital DC output module that contains 32 high density low current DC outputs. Operating voltage for 1746-OV32 is 5...50V DC sink. Backplane current load is 190... |
SLC 500 |
![]() |
Allen-Bradley 1746-OW16The Allen-Bradley SLC 500 Model 1746 Output Module receives and stores digitally converted analog data into its image table for retrieval by all fixed and modular SLC 500... |
SLC 500 |
![]() |
Allen-Bradley 1746-OW8Allen Bradley SLC 500 Digital Output Relay Module 1746-OW8 |
SLC 500 |
![]() |
Allen-Bradley 1746-OX8The Allen-Bradley 1746-OX8 is a digital contact output module that contains 8 individually isolated high current relay contact outputs. Operating voltage for 1746OX8 is 5...125V... |
SLC 500 |
![]() |
Allen-Bradley 1756-OB16EAllen-Bradley 1756-OB16E I/O Module, Digital DC Output, 16 Channel, Current Source, 12/24VDCControlLogix digital I/O modules are input and output modules that provide On/Off... |
ControlLogix |
![]() |
Allen-Bradley 1771-IQThe Allen-Bradley 1771-IQ DC Selectable Input Module accepts DC (5-30V) voltage levels on all 8 inputs and converts these signals to logic levels. Each input circuit is... |
PLC-2 |
![]() |
Allen-Bradley 1771-OQ16The Allen-Bradley 1771-OQ16 Isolated digital dc output modules control the ON/OFF status of dc user devices. Typical output devices include: motor starters, solenoids and... |
Model | Series | |
---|---|---|
![]() |
Allen-Bradley 1746-HSCEThe Allen-Bradley High-Speed Counter Module, Catalog Number 1746-HSCE is an SLC 500 family compatible device except with the 1747-ASB Remote I/O Adapter Module. It can be used... |
SLC 500 |
Model | |
---|---|
![]() |
Allen-Bradley 1771-ESAllen-Bradley 1771-ES PLC-5 Servo Encoder Feedback Expander Module, 5-30V DC Inputs, ±10V DC Servo Output Voltage, Series B |
Model | Series | |
---|---|---|
![]() |
Allen-Bradley 100-A18NA3An alternating current (ac) contactor is designed for the specific purpose of establishing or interrupting an ac power circuit |
|
![]() |
Allen-Bradley 160-DM-PS1Allen-Bradley 160-DM-PS1 Interface Module for Bulletin 160/160S Smart Speed Controllers, 24V DC, Preset Speed, Series C |
|
![]() |
Allen-Bradley 1756-CNBAllen-Bradley ControlLogix ControlNet Interface Module 1756-CNB.The ControlNet network combines the functionality of an I/O network and a peer-to-peer network, providing high-... |
ControlLogix |
![]() |
Allen-Bradley 1756-M08SEUse a SERCOS interface module to connect the controller to SERCOS interface drives. - The SERCOS interface module uses high-speed, real time, serial communication to control... |
ControlLogix |
![]() |
Allen-Bradley 1756-M16SE/AControlLogix 1756-M16SE/AThe SERCOS interface modules use a single, digital fiber-optic link, which eliminates as many as 18 digital wires per axis. Detailed drive-status... |
ControlLogix |
![]() |
Allen-Bradley 2760-RBMount the 2760-RB interface module in Slot 0 of the 1771 chassis (next to the PLC). The 2755-DS/DD barcode decoder communicates through Port 1 of the 2760-RB module. A 1771-ASB... |
PLC-2 |
Model | Series | |
---|---|---|
![]() |
Allen-Bradley 2801-N28Allen-Bradley 2801-N28 I/O module for Vision System |
2801 |