 |
Allen-Bradley 1732D-8CFGM12 1732 ArmorBlock Digital I/O Block, Built-in DeviceNet Adapter, (8) Selectable I/O Points 24V DC, Standard and Diagnostic, Self-Configuring, DC Micro (... |
|
 |
Allen-Bradley 1734-IB4 POINT I/O 24V DC 4-Channel Sink Input Module. |
|
 |
The Allen-Bradley ArmorPOINT 1738 is a modular On-Machine I/O system that saves valuable real estate. Based on the POINT I/O system-an established IP20 I/O system from Rockwell... |
|
 |
SLC 100 expansion units have the same constructions the SLC 100 processor unit. Expansion units are available in I/O configurations. The basic unit has 10 input circuits output... |
SLC 100 |
 |
SLC 100 expansion units have the same constructions the SLC 100 processor unit. Expansion units are available in I/O configurations. The basic unit has 10 input circuits output... |
SLC 100 |
 |
Allen-Bradley 1746-BAS Basic Module for SLC 500 Controller. |
SLC 500 |
 |
The Allen-Bradley 1746-HS is the IMC 110 Motion Control System. The 1746-HS is a single-axis closed loop servo positioning module that works with the SLC 500 programmable... |
SLC 500 |
 |
Allen Bradley SLC 500 input module for use with SLC 500 Processor Unit. |
SLC 500 |
 |
The Allen-Bradley SLC 500 Model 1746 Input Module receives and stores digitally converted analog data into its image table for retrieval by all fixed and modular SLC 500... |
SLC 500 |
 |
Allen Bradley SLC 500 input module for use with SLC 500 Processor Unit. Allen-Bradley 1746-IB8 SLC 500 8-Channel DC Digital Input Module Sinking, 8 Inputs, 8 Points per Common, 10... |
SLC 500 |
 |
The 1746-IO8 is a digital I/O combination module with a combination of 120V AC inputs and relay contact outputs. Input operating voltage is 85...132V AC, and output operating... |
SLC 500 |
 |
Allen-Bradley 1746-ITV16 SLC 500 16 Channels Fast Response DC Sourcing Input Module 24V DC. |
SLC 500 |
 |
The Allen-Bradley SLC 500 Model 1746 Input Module receives and stores digitally converted analog data into its image table for retrieval by all fixed and modular SLC 500... |
SLC 500 |
 |
The Allen-Bradley SLC 500 Model 1746 Input Module receives and stores digitally converted analog data into its image table for retrieval by all fixed and modular SLC 500... |
SLC 500 |
 |
The Allen-Bradley 1746-NI4 Analog Input module contains 4 analog input channels that are user selectable per channel for voltage or current to support a variety of monitoring and... |
SLC 500 |
 |
The Control Logix Sequence of Events module is a DC input module that offers sub-millisecond timestamping on a per point basis in addition to providing the basic ON/OFF detection... |
ControlLogix |
 |
ControlLogix 20 Pin Screw Terminal Block - 1756-TBNH |
ControlLogix |
 |
GFX I/O modules connect to the back of the GFX processor. Pico Expansion I/O modules connect to side of controller, and can be used with Pico or Pico GFX-70 controllers. You can... |
PICO |
 |
Allen-Bradley 1768 / 1769 CompactLogix System, Combo 6 Pt 24 VDC Snk/Src In, 4 Pt VAC/VDC Relay Out |
|
 |
The 1771- adapter module can be used with any 1771 I/O chassis. Communication between the discrete analog module and the processor is bidirectional; the processor block-transfers... |
PLC-2 |
 |
The Allen-Bradley 1771-ALX is an Extended local I/O adapter module. An I/O adapter module in a chassis with I/O modules interfaces the I/O modules with the I/O link for... |
|
 |
The Allen-Bradley 1771-ASB Remote I/O Adapter Module physically resides in a Universal I/O Chassis, and acts as a slave in an Allen Bradley subnet in an EPICS control system. The... |
|
 |
The remote I/O adapter module serves as an interface between remote I/O modules and programmable controllers. The remote I/O adapter: - transmits data up to 10,000 cable-feet (at... |
|
 |
Interfaces your ON/OFF devices to AllenBradley programmable controllers within the 1771 Universal I/O structure. Allen-Bradley digital ac I/O modules interface to ON/OFF devices... |
|
 |
Allen-Bradley 1771-IA/B Output Module 120V |
|
 |
The Allen-Bradley 1771-IAD Input Module provides:- Native I/O providing highest performance- Is chassis-based and can accommodate a wide range of I/O types- Controls an entire... |
PLC-2 |
 |
The Allen-Bradley 1771-IAD Input Module provides:- Native I/O providing highest performance- Is chassis-based and can accommodate a wide range of I/O types- Controls an entire... |
PLC-2 |
 |
The Allen-Bradley 1771-IAD Input Module provides:- Native I/O providing highest performance- Is chassis-based and can accommodate a wide range of I/O types- Controls an entire... |
PLC-2 |
 |
The Allen-Bradley 1771-IAD Input Module provides:- Native I/O providing highest performance- Is chassis-based and can accommodate a wide range of I/O types- Controls an entire... |
PLC-2 |
 |
Digital DC Input Module 1771-IB, Number Of Channels: 8, Input: Voltage Range: 10 - 27 VDC, Nominal Current: 8 MA At 12 VDC, 24 MA At 24 VDC |
PLC-2 |
 |
This 1771-IBD module receives its power through the 1771 I/O chassis backplane from the chassis power supply. The module requires 130mA from the output of this supply.This module... |
PLC-2 |
 |
Allen Bradley,1771-IBN Programmable Logic Control Module - 10-30V DC High True Input Module with 32 points. |
|
 |
This module must be used in a series B I/O chassis. The 1771-ID16 is not compatible with the 1771-AL local I/O adapter. This module contains customer-selectable input filtering to... |
|
 |
Allen Bradley,1771-IGC Series A Programmable Logic Contol - +5V TTL Input ModulePLC-5 System of Programmable Logic ControllersI/O - 1771 modules give a full range of I/O functions... |
PLC-5 |
 |
Allen-Bradley 1771-IGC Programmable Logic Control - +5V TTL Input Module PLC-5 System of Programmable Logic Controllers.PLC-5 System of Programmable Logic ControllersI/O - 1771... |
PLC-5 |
 |
This Allen-Bradley 1771-IK encoder/counter module maintains a count, independent of the processor, of input pulses that typically originate from such devices as quadrature type... |
PLC-5 |
 |
This module contains filtering to limit the effects of voltage transients caused by contact bounce and/or radiated electrical noise. The delay due to filtering is nominally 18ms... |
|
 |
Connecting Wiring to the Input ModuleConnections to the input module are made to the 10 terminal field wiring arm (cat. no. 1771-WA) shipped with the module (Figure 1). Attach the... |
|
 |
Allen-Bradley 1771-IV PLC-5 Driver Logic Input Module, (8) 12-24V DC Digital Inputs, Source (Sink load), Operating Voltage: 12-24V DC; Wiring Arm: 1771-WA, Series A |
PLC-5 |
 |
The 1771-IVN DC input module is a source input and requires a sink output. A source input provides a positive voltage path and a sink output provides a path to ground. The module... |
|
 |
Allen-Bradley 1771-IX PLC-5 Thermocouple/Millivolt Input Module, is an intelligent block transfer module that interfaces analog input signals with any Allen–Bradley programmable... |
|
 |
Allen-Bradley PLC-5 1771 Series I/O 1771-IXC Thermocouple Input Module |
PLC-5 |
 |
Allen-Bradley 1771-IXE PLC-5 Thermocouple/Millivolt Input Module, is an intelligent block transfer module that interfaces analog input signals with any Allen–Bradley programmable... |
|
 |
The output module is powered by the power supply connected to the I/O chassis backplane. The module requires a maximum current of 210mA from the +5V dc output of this supply.... |
|
 |
You can use an output of the 1771-OA module to drive an input of a 120V AC input module (1771-IA, -IA2, -ID and -IAD) to indicate status, such as the turning on a motor starter.... |
PLC-2 |
 |
This module uses zero-crossing technology to allow turn-on when the output voltage is less than a specified voltage (typically 40 to 50V). This module receives its power through... |
PLC-2 |
 |
You can directly drive terminals on a DC (12-24V) Input Module (cat. no. 1771-IB) from terminals on the DC (12-24V) Output module (cat. no. 1771-OB) as shown in Important: Use the... |
|
 |
The Allen-Bradley 1771-OBD is a 10-30V DC output module, 16 outputs. Place your module in any I/O module slot of the I/O chassis, except for the extreme left slot. This slot is... |
|
 |
Allen Bradley DC Output Module 1771-OBE |
|
 |
Allen-Bradley 1771-OBN PLC-5 10-30V DC High-True Output Module with 32 Outputs. |
|
 |
Allen-Bradley 1771-OC PLC-5 Digital DC Output Module, 8 x Source Outputs, 10-60V DC, Series B |
PLC-2 |
 |
This module receives its power through the 1771 I/O chassis backplane from the chassis power supply. The module requires 700mA from the output of this supply. Add this to the... |
|
 |
Interfaces your ON/OFF devices to AllenBradley programmable controllers within the 1771 Universal I/O structure. Allen-Bradley digital ac I/O modules interface to ON/OFF devices... |
|
 |
Interfaces your ON/OFF devices to AllenBradley programmable controllers within the 1771 Universal I/O structure. Allen-Bradley digital ac I/O modules interface to ON/OFF devices... |
|
 |
Allen-Bradley 1771-OD digital output module 6 pointConnections to the output module are made to the field wiring arm (cat. no. 1771-WH) shipped with the module. An optional fused... |
|
 |
Allen Bradley,1771-OFC Series B Programmable Logic Contol - Analog Output Module 12-bit PLC-5 System of Programmable Logic Controllers |
|
 |
The TTL module requires power from two sources: the I/O chassis backplane, and a +5V dc power supply that you provide for transmission of TTL signals.The TTL module receives its... |
|
 |
The TTL module requires power from two sources: the I/O chassis backplane, and a +5V dc power supply that you provide for transmission of TTL signals.The TTL module receives its... |
|
 |
The Allen-Bradley 1771-OGD is a TTL compatible discrete Output module that will interface to TTL output device and will control up to 16 outputs. The 1771-OGD has output diode... |
|
 |
This module receives its power through the 1771 I/O chassis backplane from the chassis power supply. The module requires 700mA from the output of this supply. Add this to the... |
|
 |
This module receives its power through the 1771 I/O chassis backplane from the chassis power supply. The module requires 700mA from the output of this supply. Add this to the... |
|
 |
Allen-Bradley relay contact output modules offer either normally-open (Form A) or normally-closed (Form B) configurations. You can select the form configuration for four of the... |
|
 |
Allen-Bradley 1771-OYC Contact Output Module 10-276V AC |
PLC-5 |
 |
Allen Bradley 1771-OZ.Description: Allen Bradley PLC 5 Contact Output Module, 8 N.O., 30 VA at 138 VAC or 20 VA at 125 VDC Max Voltage |
|
 |
The 1771-OZL module has 8 Form A relays. The outputs are arranged in 4 groups of 2, each group with its own common. Each output is electrically isolated from module logic... |
|
 |
The 1771-SIM Module is an input simulation and output indicating module. It can be inserted into any 1771 Universal I/O chassis. The switches on this single-slot module simulate... |
|
 |
Allen Bradley Sub I/O Scanner Module 1771-SN. The 1771-SN Sub I/O Scanner Module is used to expand your I/O sub-system by up to 896 digital remote I/O.The sub I/O scanner can... |
|
 |
The Mini-PLC-2/05 processor is functionally similar to the Mini-PLC-2/15 processor. The Mini-PLC-2/05 processor has some additional features: 3K CMOS RAM memory 488 timers, up to... |
PLC-2 |
 |
The 1772-SD2 Remote I/O Scanner/Distribution Panel is a compact, single board, stand-alone unit.It enables the Allen-Bradley PLC-2, PLC-2/20 and PLC-2/30 processors to communicate... |
|
|
|
Allen-Bradley 1781-IB5S Slim input module. Slim modules have a hold-down screw, and can be used in mounting boards where vibration and shock are not of concern.See also: Allen-... |
2801 |
|
|
Allen-Bradley 1781-OB5S Slim output module. Slim modules have a hold-down screw, and can be used in mounting boards where vibration and shock are not of concern. |
2801 |
 |
Allen-Bradley 1791-8BR Block I/O, 24V DC, 16 Point Module. |
|
 |
CompactBlock I/O modules are compatible with PLC, SLC or SoftLogix programmable controllers using DeviceNet scanners. All CompactBlock I/O module values are accessible through the... |
|
 |
CompactBlock I/O modules are compatible with PLC, SLC or SoftLogix programmable controllers using DeviceNet scanners. All CompactBlock I/O module values are accessible through the... |
|
 |
Allen-Bradley 1791DS and 1791ES CompactBlock™ Guard I/O™ modules provide the advantages of distributed I/O for safety systems. These modules work with safety controllers that... |
|
 |
Allen-Bradley 1791DS and 1791ES CompactBlock™ Guard I/O™ modules provide the advantages of distributed I/O for safety systems. These modules work with safety controllers that... |
|
 |
The Allen-Bradley 1791ES CompactBlock Guard I/O for EtherNet/IP. This module provides the advantages of distributed I/O for safety systems. They work with safety controllers that... |
|
 |
Allen-Bradley 1794-ADN DeviceNet FLEX I/O 24V DC Media Adapter Module, Series B. |
1794 |
 |
Capabilities of the 1794-IB16D include:- 61131-2 Type 3 compatible sinking inputs.- interface with PNP sourcing sensors.- 10-31.2V dc operating range.- provides up to 50 mA to... |
1794 |
|
|
Capabilities of the 1794-IH16:- 61131-2 Type 3 compatible sinking inputs.- interface with PNP sourcing sensors.- 10-31.2V dc operating range.- provides up to 50 mA to power an... |
1794 |
 |
You can use FLEX I/O diagnostic output modules to drive a variety of output devices. Typical output devices include the following: Relays, Solenoids, Contactors, Indicators, and... |
1794 |
 |
Allen-Bradley 1794-OB16P FLEX I/O Output Module. The Allen-Bradley 1794-OB16P I/O module is a Flex digital DC output module for programmable controller sourcing ( 24 VDC, 16... |
1794 |
|
|
Allen-Bradley 1794-OE4 I/O Module, 4 Single Ended, Analog Output, 20mA, 24VDC |
1794 |
|
|
Allen-Bradley 2755-IB5S is the same as 1781-IB5S Slim input module. Slim modules have a hold-down screw, and can be used in mounting boards where vibration and shock are not of... |
2801 |
|
|
Allen Bradley 2801-JID. 24V 5V LOGIC SLIM . |
2801 |
|
|
Allen Bradley 2801-JOD 3-60 VDC 5V logic 1 Point Output Module |
2801 |
 |
Allen Bradley 8500-1746I I/O Ring Adapter Module 9/Series |
|
