Allen-Bradley 1771-CL

This cable attaches to the 1771-PA Power Supply.

For ease of installation, the I/O Power Cable is installed prior to installing the Mini-PLC-2/15 Processor Module. The I/O Power Cable comes in two lengths to accommodate either Power Supply mounting configuration:
- 1 ft/30.5 cm (Cat. No. 1771-CL)
- 5 ft/1.5 m (Cat. No. 1771-CM)
The I/O Power Cable (Figure 3.21) has three plugs: one 3-pin plug and two 9-pin plugs that are labeled for proper connection. The 3-pin plug connects to the base of the Battery Pack. One 9-pin plug fits into the socket at the base of the Power Supply and the other 9-pin plug connects to the I/O Chassis socket. Side snap-lock levers hold the plug in the socket. To disconnect a cable, squeeze in on the snap-lock levers and pull gently.